Skip to content

Notify_smseagle

Jump to bottom
Chris Caron edited this page Sep 6, 2022 · 4 revisions

SMSEagle Notifications

  • Source: https://www.smseagle.eu/
  • Icon Support: No
  • Attachment Support: Yes
  • Message Format: Text
  • Message Limit: 160 Characters per message

Account Setup

Get your SMSEagle Hardware SMS/MMS Gateway connection from here. It is from the device you can access it's web interface and configure your access token.

Syntax

Valid syntax is as follows:

  • smseagles://{token}@{hostname}/{target}
  • smseagles://{token}@{hostname}:{port}/{target}

A target can be either a phone number, a contact, or if prefixed with # it becomes a group. Contacts are generally prefixed with a @.

  • smseagles://{token}@{hostname}:{port}/{phoneNo}
  • smseagles://{token}@{hostname}:{port}/{phoneNo1}/{phoneNo2}/{phoneNoN}
  • smseagles://{token}@{hostname}:{port}/@{contact}
  • smseagles://{token}@{hostname}:{port}/@{contact1}/@{contact2}/@{contactN}
  • smseagles://{token}@{hostname}:{port}/#{group}
  • smseagles://{token}@{hostname}:{port}/#{group1}/#{group2}/#{groupN}

Note: If you choose to leverage Groups, make sure your group as Public or it will not work from the API. image

You can mix and match as well

  • smseagles://{token}@{hostname}:{port}/{to_phone1}/3@{group1}/@{contact1}

For ambiguity, if you do not provide a valid phone number, and the information parsed does not exclusively have a # or @ in front of it, then it is interpreted as a Contact.

smseagle:/// uses port 80 (and is not encrypted) while smseagles:// secures the connection and defaults to port 443.

Parameter Breakdown

Variable Required Description
hostname Yes The hostname belonging to SMSEagle Appliance and/or account.
token Yes This is your generated Access Token associated with your SMSEagle account.
port No The port our Web server is listening on. By default the port is 80 for smseagle:// and 443 for all smseagles:// references.
target Yes A phone number, group, and/or contact you wish to send your notification to.
batch No Send multiple specified notifications in a single batch (1 upstream post to the end server). By default this is set to no.
test No Run in SMSEagle test mode. By default (unless specified) this is set to No.
flash No Send as SMS Flash message. By default (unless specified) this is set to No.
priority No Can be set to either normal or high. If not otherwise provided, this assumes to be normal by default.
status No Optionally include a small little ASCII string representing the notification status being sent (inline with it) by default this is set to no.

Example

Send a SMSEagle notification:

# Assuming our {AccessToken} is abcd123
# Assuming our {Hostname} of our SMSEagle Appliance is smseagle.example.com
# Assuming we want to notify 555221237, and +18005551234
# Test out the changes with the following command:
apprise -t "Test Title" -b "Test Message" \
 smseagle://[email protected]/555221237/+18005551234

SMSEagle Notifications also support attachments (Images only though):

# Assuming our {WebhookID} is 4174216298
# Assuming our {WebhookToken} is JHMHI8qBe7bk2ZwO5U711o3dV_js
# Assuming our {AvatarURL} is https://i.imgur.com/FsEpmwg.jpeg
# Also support for attachments:
apprise -t "Test Title" -b "Test Message" \
 smseagle://[email protected]/555221237/+18005551234 \
 --attach /path/to/image.png

Quick Links:

Clone this wiki locally