node-installation

Installing a node on a Indy blockchain - Steward Validator

---

Version Française

To provide a quick start, here are the documents you want to start with:

The following is a set of documents from the Sovrin Foundation for onboarding stewards onto the Sovrin Network. Great reference material for setting up a network:

• Steward Validator Preparation Guide v3
• AWS Indy Node VM Install
• Azure Indy Node VM Install
• GCP Indy Node VM Install
• Install Indy Node on physical hardware

And there is this reference document for what’s involved with setting up a new indy-node based network which references some of the above documentation:

• Create New Indy Network

The documents in this repo only for archive purpose. Use the links to be sure to access up to date documentation.

Dev Network machine sizing

• 2 vCPUs cores
• 8G RAM
• 250G disk
• 2 NICs with 2 Public IP addresses on separate subnets (1 per NIC)
• Up to 5 Gigabit for network performance

For exemple on AWS this would be a t3.large machine.

Staging Network machine sizing

• 8 vCPUs cores
• 32G RAM
• 250G disk
• 2 NICs with 2 Public IP addresses on separate subnets (1 per NIC)

For example on AWS this would be a t3.2xlarge