hostapd: no process found (zed_fmcs2)

[jitesh1023]

0. Could you send email to [email protected] to introduce your self?
   Yes, I mailed you sir.

1. Our image is used directly or yould your own image?
   It is our image used sir, there is no modification in image file.

2. What is your own modification?
   NA

3. Versions: OS, Vivado, openwifi/openwifi-hw repo branch and commit revision
   Ubuntu 24.04.1 LTS

4. Board/hardware type?
   zed_fmcs2

I'm beginner in working openwifi/sdr

Im facing an error stating as below while running ./wgh.sh. Could you guide in working out this project
Below is the issue:

root@analog:~/openwifi# ./wgd.sh
usage:
Script for load (or download+load) different driver and FPGA img without rebooting
no argument: Load .ko driver files and FPGA img (if system_top.bit.bin exist) in current dir with test_mode=0.
1st argument: If it is a NUMBER, it will be assigned to test_mode. Then load everything from current dir.
1st argument: If it is a string called "remote", it will download driver/FPGA and load everything.

• 2nd argument (if exist) is the target directory name for downloading and reloading
• 3rd argument (if exist) is the value for test_mode
  1st argument: neither NUMBER nor "remote" nor a .tar.gz file, it is regarded as a directory and load everything from it.
• 2nd argument (if exist) is the value for test_mode
  1st argument: a .tar.gz file, it will be unpacked then load from that unpacked directory
• 2nd argument (if exist) is the value for test_mode

Module Size Used by
mac80211 565248 0
libarc4 16384 1 mac80211
xilinx_dma 28672 0
ad9361_drv 163840 0
cfg80211 319488 1 mac80211
8021q 24576 0
ipv6 397312 28
TARGET_DIR ./
DOWNLOAD_FLAG 0
test_mode 0
tx_offset_tuning_enable 0
$TARGET_DIR is found!

hostapd: no process found
dhcpd: no process found
sdr0: ERROR while getting interface flags: No such device
rmmod: ERROR: Module sdr is not currently loaded
./load_fpga_img.sh: line 14: warning: command substitution: ignored null byte in input
xlnx,zynq-7000
.//system_top.bit.bin
system_top.bit.bin

• ifconfig sdr0 down
  sdr0: ERROR while getting interface flags: No such device
• rmmod sdr
  rmmod: ERROR: Module sdr is not currently loaded
• rmmod openofdm_rx
  rmmod: ERROR: Module openofdm_rx is not currently loaded
• rmmod openofdm_tx
  rmmod: ERROR: Module openofdm_tx is not currently loaded
• rmmod rx_intf
  rmmod: ERROR: Module rx_intf is not currently loaded
• rmmod tx_intf
  rmmod: ERROR: Module tx_intf is not currently loaded
• rmmod xpu
  rmmod: ERROR: Module xpu is not currently loaded
• sleep 1
• '[' -f .//system_top.bit.bin ']'
• echo 0
• mkdir -p /lib/firmware
• cp .//system_top.bit.bin /lib/firmware/ -rf
• echo system_top.bit.bin
• '[' xlnx,zynq-7000 '!=' xlnx,zynq-7000 ']'
• SPI_DEVNAME=spi0.0
• DDS_DEVNAME=79024000.cf-ad9361-dds-core-lpc
• ADC_DEVNAME=79020000.cf-ad9361-lpc
• '[' '!' -d /sys/bus/spi/drivers/ad9361/spi0.0 ']'
• echo 'Waiting for /sys/bus/spi/drivers/ad9361/spi0.0'
  Waiting for /sys/bus/spi/drivers/ad9361/spi0.0
• sleep 0.2
• '[' '!' -d /sys/bus/spi/drivers/ad9361/spi0.0 ']'
• echo 'Waiting for /sys/bus/spi/drivers/ad9361/spi0.0'
  Waiting for /sys/bus/spi/drivers/ad9361/spi0.0
• sleep 0.2
• '[' '!' -d /sys/bus/spi/drivers/ad9361/spi0.0 ']'
• echo 'Waiting for /sys/bus/spi/drivers/ad9361/spi0.0'
  Waiting for /sys/bus/spi/drivers/ad9361/spi0.0
• sleep 0.2
• '[' '!' -d /sys/bus/spi/drivers/ad9361/spi0.0 ']'
• echo 'Waiting for /sys/bus/spi/drivers/ad9361/spi0.0'
  Waiting for /sys/bus/spi/drivers/ad9361/spi0.0
• sleep 0.2

These lines goes on repeating endlessly.